Master Welding Symbols with Ease
Sandeep Kumar 
If you go to purchase semi-finished products from steel mill or supplier, you will notice four primary classifications of Semi-finished casting products: Ingots, blooms, slabs, …
Written by: Sandeep Kumar
Published on:
Cladding is a versatile surfacing technique used to deposit or apply a protective layer of material onto a metal surface. It is commonly employed to …
Written by: Sandeep Kumar
Published on:
What is Arc Length in Welding? In welding, arc length refers to the distance between the tip of the welding electrode or welding wire and …
Written by: Sandeep Kumar
Published on:
What is Self Shielded Flux Cored Arc Welding (FCAW-S)? Self Shielded Flux Cored Arc Welding (FCAW-S) is a variation of the flux cored arc welding …
Written by: Sandeep Kumar
Published on:
Linear Indication in Welding Linear indication is a term used in welding to describe a test result where a defect or discontinuity in the material …
Written by: Sandeep Kumar
Published on:
Effective throat thickness in welding refers to the distance measured from the root of the weld to the face of the fillet along the axis …
Written by: Sandeep Kumar
Published on:
What is Kerf in Welding? Kerf in welding refers to the width of material that is removed during a cutting operation, specifically in relation to …
Written by: Sandeep Kumar
Published on:
What is a Toe Crack in Welding? A toe crack in welding refers to a specific type of welding defect that can occur at the …
Written by: Sandeep Kumar
Published on:
What is Weld Buildup? Weld buildup refers to the process of adding extra material to a welding joint to either increase its dimensions or enhance …
Written by: Sandeep Kumar
Published on:
What is a Welding Rectifier? A welding rectifier is an electrical device used in welding equipment to convert alternating current (AC) into direct current (DC). …
Written by: Sandeep Kumar
Published on: